General

• USB 2.0 High-Speed with a maximum of 40MB/sec data transfer rate

• Dimensions: 190mm x 150mm x 65mm (L, W, H)

• Near-transducer setup

   Transmitter

• Maximum of 16 independent transmitters

• Transmitter pulse voltage: -10 to -300V, adjustable in 1V increments, or switchable between -175V and -260V (optional) 

• Negative rectangle pulse

• Output impedance: 50Ω

• Pulse delay: 0µs to 51µs, adjustable in 6.25ns increments

• Pulse width: 0ns to 500ns, adjustable in 3.125ns increments

• Pulse repetition frequency: up to 2kHz, depending on recording length, pulse width, sampling rate and transmitter voltage

   Receiver

• Maximum of 16 independent receivers

• Pulse/Echo or Transmit/Receive mode (1 x P/E or 1 x T/R per channel)

• Frequency range: 500kHz to 30MHz (-3dB)

• Receiver filter: two analog band filters per channel (user defined)

• Attenuation/amplification: >100dB, adjustable in 0.1dB increments

• TGC with 80dB dynamic range, adjustable in 0.1dB increments; 256 points,
  slope ≤ 40dB/µs

• Receiver delay: 0µs to 819µs, adjustable in 12.5ns increments

• Input sensitivity: 100μVss

   Signal Path

• Transducer delay: 0μs to 819μs, 12.5ns increments

• Maximum recording length: 65,535 samples per channel

• A/D Converter: 14bit, max. 80MS/sec

• One start gate and four measurement gates

• RF-Data or compressed TD-Data recording

• Rectification:  positive-, negative- or full-wave

• Trigger delay per channel: 0µs to 819µs, adjustable in 12.5ns increments

   Interface and Connectors

• Transducer connectors: Lemo 00

• USB 2.0 High-Speed: Bulgin Connector PX0443

• Power consumption: max. 12VDC, max. 48W (30W typical); Bulgin Connector PX0419

• Trigger IN: TTL high/low active; pulse width >100ns, opto-coupled (Lemo 00)

• Trigger OUT: LVTTK high active, pulse width >2.5µs (Lemo 00)

• Scanner interface: DSCU-25 socket (4 encoders, RS422.485)

   Software

• Digitally signed drivers for Windows^® XP (SP2 or higher), Windows^® Vista and Windows^® 7 (32bit and 64bit)

• Managed Windows^® API (based on .NET 4.0 framework)